You’re bored with listening to cassettes and only being able to enjoy the radio, while your phone is full of your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve written this content page to help you, because right now you’re going to learn about how to install a car radio on your Chevrolet Malibu. To get this done, initially we will find out how to remove the old car radio, then how to install a car radio on Chevrolet Malibu and finally, how to connect it.
How to install car radio on Chevrolet Malibu: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Chevrolet Malibu, there is one fundamental step, take away the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two ways depending on the stereo that equips your Chevrolet Malibu:
- Original car radio:
In this case, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Chevrolet Malibu. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Chevrolet Malibu: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Chevrolet Malibu. Ahead of time, take the time to verify the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Chevrolet Malibu, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chevrolet Malibu, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Chevrolet Malibu, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To get more tips on the Chevrolet Malibu, take a look at the Chevrolet Malibu category.
