You’re tired of listening to cassettes and only having the capability to listent to the radio, while your smartphone is filled with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve written and published this content to help you, because in this article you’re going to find out how to install a car radio on your Chevrolet HHR. To do this, first of all we will discover how to remove the old car radio, then how to install a car radio on Chevrolet HHR and finally, how to connect it.
How to install car radio on Chevrolet HHR: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Chevrolet HHR, there is one important task, take out the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two ways according to the stereo that equips your Chevrolet HHR:
- Original car radio:
In cases like this, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Chevrolet HHR. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Chevrolet HHR: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Chevrolet HHR. Beforehand, take some time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Chevrolet HHR, once installed, remember to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chevrolet HHR, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Chevrolet HHR, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
Whenever you have any additional questions about the Chevrolet HHR, do not hesitate to consult our Chevrolet HHR category.
