You’re bored with listening to cassettes and only being able to listent to the radio, while your phone is filled with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve posted this article content to help you, because right now you’re going to learn about how to install a car radio on your Chevrolet Express. To do this, first we will find out how to remove the old car radio, then how to install a car radio on Chevrolet Express and finally, how to connect it.
How to install car radio on Chevrolet Express: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Chevrolet Express, there is one essential task, remove the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two methods determined by the stereo that equips your Chevrolet Express:
- Original car radio:
In this case, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Chevrolet Express. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this situation the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Chevrolet Express: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Chevrolet Express. Beforehand, take the time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Chevrolet Express, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chevrolet Express, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Chevrolet Express, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you have any additional questions about the Chevrolet Express, do not hesitate to consult our Chevrolet Express category.
