You’re uninterested in listening to cassettes and only having the ability to enjoy the radio, while your smartphone is loaded with your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve posted this content to help you, because now you’re going to learn about how to install a car radio on your Chevrolet Corvette. To do this, first we will find out how to remove the old car radio, then how to install a car radio on Chevrolet Corvette and at last, how to connect it.

install-car-radio-chevrolet-corvette

How to install car radio on Chevrolet Corvette: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Chevrolet Corvette, there is one important task, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two solutions based on the stereo that equips your Chevrolet Corvette:

  • Original car radio:
    In this instance, you’ll have to be persistent, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Chevrolet Corvette. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this situation the method is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Chevrolet Corvette: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your Chevrolet Corvette. Beforehand, spend some time to verify the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Chevrolet Corvette, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chevrolet Corvette, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Chevrolet Corvette, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

If you want more tutorials on the Chevrolet Corvette, go to our Chevrolet Corvette category.