You’re tired of listening to cassettes and only having the capability to enjoy the radio, while your smart phone is full of your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve written and published this content to help you, because in this article you’re going to find out how to install a car radio on your Chevrolet Aveo. To do this, first we will discover how to remove the old car radio, then how to install a car radio on Chevrolet Aveo and to finish, how to connect it.
How to install car radio on Chevrolet Aveo: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Chevrolet Aveo, there is one fundamental task, take off the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two options depending on the stereo that equips your Chevrolet Aveo:
- Original car radio:
In this instance, you’ll have to be patient, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Chevrolet Aveo. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Chevrolet Aveo: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Chevrolet Aveo. Beforehand, spend some time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Chevrolet Aveo, once installed, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chevrolet Aveo, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Chevrolet Aveo, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To get more tips on the Chevrolet Aveo, take a look at the Chevrolet Aveo category.
