You’re uninterested in listening to cassettes and only having the capability to listent to the radio, while your smartphone is loaded with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve created this article content to help you, because in this article you’re going to find out how to install a car radio on your Cadillac SRX. To make this happen, first we will see how to remove the old car radio, then how to install a car radio on Cadillac SRX and at last, how to connect it.

install-car-radio-cadillac-srx

How to install car radio on Cadillac SRX: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Cadillac SRX, there is one necessary task, take out the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two options depending on the stereo that equips your Cadillac SRX:

  • Original car radio:
    In cases like this, you’ll have to be patient, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Cadillac SRX. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this situation the method is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Cadillac SRX: Fitting and connecting the car radio

Let’s go to the essential step for you, how to install a car stereo on your Cadillac SRX. Before you start, take some time to check the compatibility of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Cadillac SRX, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Cadillac SRX, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Cadillac SRX, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

Whenever you have any further questions about the Cadillac SRX, do not hesitate to consult our Cadillac SRX category.