You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your smartphone is full of your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s precisely why we’ve posted this content to help you, because now you’re going to find out how to install a car radio on your Cadillac Escalade. To do this, initially we will see how to remove the old car radio, then how to install a car radio on Cadillac Escalade and at last, how to connect it.

install-car-radio-cadillac-escalade

How to install car radio on Cadillac Escalade: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Cadillac Escalade, there is one imperative task, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two techniques based on the stereo that equips your Cadillac Escalade:

  • Original car radio:
    In cases like this, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Cadillac Escalade. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this situation the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Cadillac Escalade: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Cadillac Escalade. Beforehand, take some time to examine the suitability of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Cadillac Escalade, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Cadillac Escalade, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Cadillac Escalade, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

To discover more tips on the Cadillac Escalade, take a look at the Cadillac Escalade category.