You’re uninterested in listening to cassettes and only being able to enjoy the radio, while your smart phone is full of your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve posted this content to help you, because in this article you’re going to learn about how to install a car radio on your Buick Enclave. To make this happen, initially we will discover how to remove the old car radio, then how to install a car radio on Buick Enclave and to finish, how to connect it.

install-car-radio-buick-enclave

How to install car radio on Buick Enclave: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Buick Enclave, there is one fundamental task, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two ways dependant upon the stereo that equips your Buick Enclave:

  • Original car radio:
    In this case, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Buick Enclave. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections.
  • Aftermarket radio :
    In this scenario the process is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Buick Enclave: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Buick Enclave. Beforehand, take some time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Buick Enclave, once situated, don’t forget to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Buick Enclave, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Buick Enclave, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If you want more guides on the Buick Enclave, go to our Buick Enclave category.