You’re sick and tired of listening to cassettes and only having the capability to listent to the radio, while your phone is filled with your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve made this content to help you, because now you’re going to learn about how to install a car radio on your Bmw Serie 5. To do this, first of all we will discover how to remove the old car radio, then how to install a car radio on Bmw Serie 5 and at last, how to connect it.
How to install car radio on Bmw Serie 5: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Bmw Serie 5, there is one imperative task, take away the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two methods dependent on the stereo that equips your Bmw Serie 5:
- Original car radio:
In this case, you’ll have to be persistent, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Bmw Serie 5. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this situation the technique is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Bmw Serie 5: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Bmw Serie 5. Beforehand, spend some time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Bmw Serie 5, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Bmw Serie 5, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Bmw Serie 5, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To discover more tips on the Bmw Serie 5, take a look at the Bmw Serie 5 category.
