You’re uninterested in listening to cassettes and only having the ability to listent to the radio, while your smart phone is filled with your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve made this article content to help you, because right now you’re going to find out how to install a car radio on your Bmw Serie 1. To accomplish this, initially we will find out how to remove the old car radio, then how to install a car radio on Bmw Serie 1 and to finish, how to connect it.
How to install car radio on Bmw Serie 1: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Bmw Serie 1, there is one important task, take out the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two ways dependent on the stereo that equips your Bmw Serie 1:
- Original car radio:
In this case, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Bmw Serie 1. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Bmw Serie 1: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Bmw Serie 1. Beforehand, take the time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Bmw Serie 1, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Bmw Serie 1, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Bmw Serie 1, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you have any further questions about the Bmw Serie 1, do not hesitate to consult our Bmw Serie 1 category.
