You’re sick and tired of listening to cassettes and only having the ability to enjoy the radio, while your phone is full of your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s precisely why we’ve written this article content to help you, because right now you’re going to find out how to install a car radio on your BMW 5 Series. To achieve this, first of all we will find out how to remove the old car radio, then how to install a car radio on BMW 5 Series and to finish, how to connect it.
How to install car radio on BMW 5 Series: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your BMW 5 Series, there is one fundamental step, take off the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two methods according to the stereo that equips your BMW 5 Series:
- Original car radio:
In this instance, you’ll have to be persistent, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your BMW 5 Series. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this scenario the operation is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your BMW 5 Series: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your BMW 5 Series. Before you start, spend some time to examine the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your BMW 5 Series, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your BMW 5 Series, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on BMW 5 Series, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If perhaps you have any additional questions about the BMW 5 Series, do not hesitate to consult our BMW 5 Series category.
