You’re sick and tired of listening to cassettes and only having the capacity to enjoy the radio, while your smartphone is full of your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s specifically why we’ve created this content page to help you, because in this article you’re going to find out how to install a car radio on your Audi S3. To do this, initially we will find out how to remove the old car radio, then how to install a car radio on Audi S3 and to finish, how to connect it.

install-car-radio-audi-s3

How to install car radio on Audi S3: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Audi S3, there is one imperative task, take away the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two ways depending on the stereo that equips your Audi S3:

  • Original car radio:
    In this instance, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Audi S3. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this situation the method is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Audi S3: Fitting and connecting the car radio

Let’s go to the most important section for you, how to install a car stereo on your Audi S3. Beforehand, take some time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Audi S3, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi S3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Audi S3, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

To get more tips on the Audi S3, take a look at the Audi S3 category.