You’re sick and tired of listening to cassettes and only having the ability to enjoy the radio, while your smartphone is loaded with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve posted this article to help you, because in this article you’re going to find out how to install a car radio on your Audi Q7. To accomplish this, first we will find out how to remove the old car radio, then how to install a car radio on Audi Q7 and finally, how to connect it.
How to install car radio on Audi Q7: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Audi Q7, there is one essential task, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two solutions according to the stereo that equips your Audi Q7:
- Original car radio:
In this instance, you’ll have to be persistent, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Audi Q7. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi Q7: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Audi Q7. Beforehand, take the time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Audi Q7, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi Q7, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Audi Q7, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
Whenever you have any additional questions about the Audi Q7, do not hesitate to consult our Audi Q7 category.
