You’re uninterested in listening to cassettes and only having the capability to enjoy the radio, while your phone is filled with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve posted this article to help you, because in this article you’re going to find out how to install a car radio on your Audi Q3. To do this, initially we will discover how to remove the old car radio, then how to install a car radio on Audi Q3 and at last, how to connect it.
How to install car radio on Audi Q3: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Audi Q3, there is one fundamental step, remove the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two ways determined by the stereo that equips your Audi Q3:
- Original car radio:
In this instance, you’ll have to be patient, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Audi Q3. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi Q3: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Audi Q3. Ahead of time, take some time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Audi Q3, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi Q3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Audi Q3, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To find more tips on the Audi Q3, take a look at the Audi Q3 category.
