You’re tired of listening to cassettes and only having the capacity to enjoy the radio, while your smart phone is full of your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s exactly why we’ve created this article content to help you, because in this article you’re going to learn about how to install a car radio on your Audi A7. To achieve this, initially we will find out how to remove the old car radio, then how to install a car radio on Audi A7 and at last, how to connect it.
How to install car radio on Audi A7: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Audi A7, there is one essential task, take away the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two ways based on the stereo that equips your Audi A7:
- Original car radio:
In this instance, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Audi A7. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi A7: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Audi A7. Ahead of time, take the time to examine the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various actions required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Audi A7, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi A7, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Audi A7, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you want more guides on the Audi A7, go to our Audi A7 category.
