You’re bored with listening to cassettes and only having the ability to listent to the radio, while your phone is loaded with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve posted this article content to help you, because in this article you’re going to find out how to install a car radio on your Audi A5. To make this happen, first we will see how to remove the old car radio, then how to install a car radio on Audi A5 and finally, how to connect it.

install-car-radio-audi-a5

How to install car radio on Audi A5: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Audi A5, there is one fundamental step, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two techniques dependent on the stereo that equips your Audi A5:

  • Original car radio:
    In cases like this, you’ll have to be persistent, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Audi A5. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this scenario the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Audi A5: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Audi A5. Ahead of time, take the time to check the suitability of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Audi A5, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi A5, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Audi A5, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

To find more tips on the Audi A5, take a look at the Audi A5 category.