You’re sick and tired of listening to cassettes and only having the capability to enjoy the radio, while your phone is full of your favourite music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve made this article content to help you, because in this article you’re going to find out how to install a car radio on your Audi A4. To accomplish this, initially we will see how to remove the old car radio, then how to install a car radio on Audi A4 and at last, how to connect it.
How to install car radio on Audi A4: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Audi A4, there is one fundamental step, take out the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two options dependent on the stereo that equips your Audi A4:
- Original car radio:
In this instance, you’ll have to be persistent, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Audi A4. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the method is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi A4: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Audi A4. Beforehand, take some time to verify the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Audi A4, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi A4, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Audi A4, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any further questions about the Audi A4, do not hesitate to consult our Audi A4 category.
