You’re tired of listening to cassettes and only having the capability to listent to the radio, while your smart phone is loaded with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve posted this content to help you, because right now you’re going to find out how to install a car radio on your Audi A2. To accomplish this, first we will discover how to remove the old car radio, then how to install a car radio on Audi A2 and at last, how to connect it.

install-car-radio-audi-a2

How to install car radio on Audi A2: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Audi A2, there is one fundamental task, take out the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two techniques depending on the stereo that equips your Audi A2:

  • Original car radio:
    In cases like this, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Audi A2. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections.
  • Aftermarket radio :
    In this situation the method is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Audi A2: Fitting and connecting the car radio

Let’s go to the essential step for you, how to install a car stereo on your Audi A2. Beforehand, take some time to examine the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Audi A2, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi A2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Audi A2, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If you need more guides on the Audi A2, go to our Audi A2 category.