You’re uninterested in listening to cassettes and only being able to listent to the radio, while your smart phone is loaded with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s specifically why we’ve written and published this content page to help you, because now you’re going to learn about how to install a car radio on your Audi A1. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Audi A1 and to finish, how to connect it.
How to install car radio on Audi A1: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Audi A1, there is one fundamental task, remove the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two techniques according to the stereo that equips your Audi A1:
- Original car radio:
In this case, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Audi A1. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the process is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi A1: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Audi A1. Ahead of time, take the time to verify the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Audi A1, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi A1, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Audi A1, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To discover more tips on the Audi A1, take a look at the Audi A1 category.
