You’re uninterested in listening to cassettes and only having the ability to listent to the radio, while your smartphone is filled with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s precisely why we’ve made this content page to help you, because now you’re going to find out how to install a car radio on your Alfa Romeo Mito. To accomplish this, first we will discover how to remove the old car radio, then how to install a car radio on Alfa Romeo Mito and to finish, how to connect it.


How to install car radio on Alfa Romeo Mito: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Alfa Romeo Mito, there is one essential task, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two options dependent on the stereo that equips your Alfa Romeo Mito:

  • Original car radio:
    In this instance, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Alfa Romeo Mito. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this scenario the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Alfa Romeo Mito: Fitting and connecting the car radio

Let’s go to the essential part for you, how to install a car stereo on your Alfa Romeo Mito. Before you start, spend some time to examine the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Alfa Romeo Mito, once situated, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Alfa Romeo Mito, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Alfa Romeo Mito, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

To discover more tips on the Alfa Romeo Mito, take a look at the Alfa Romeo Mito category.