You’re bored with listening to cassettes and only having the ability to listent to the radio, while your smartphone is filled with your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s precisely why we’ve created this content to help you, because now you’re going to learn about how to install a car radio on your Alfa Romeo 159. To accomplish this, initially we will discover how to remove the old car radio, then how to install a car radio on Alfa Romeo 159 and at last, how to connect it.
How to install car radio on Alfa Romeo 159: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Alfa Romeo 159, there is one fundamental step, remove the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two ways dependant upon the stereo that equips your Alfa Romeo 159:
- Original car radio:
In this case, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Alfa Romeo 159. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the technique is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Alfa Romeo 159: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Alfa Romeo 159. Beforehand, spend some time to check the compatibility of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various actions required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Alfa Romeo 159, once situated, don’t forget to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Alfa Romeo 159, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Alfa Romeo 159, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you wish more tutorials on the Alfa Romeo 159, go to our Alfa Romeo 159 category.
