You’re sick and tired of listening to cassettes and only having the ability to enjoy the radio, while your smartphone is filled with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve made this content to help you, because right now you’re going to learn about how to install a car radio on your Acura TLX. To make this happen, first of all we will find out how to remove the old car radio, then how to install a car radio on Acura TLX and to finish, how to connect it.
How to install car radio on Acura TLX: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Acura TLX, there is one fundamental task, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions based on the stereo that equips your Acura TLX:
- Original car radio:
In cases like this, you’ll have to be persistent, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Acura TLX. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Acura TLX: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Acura TLX. Ahead of time, spend some time to verify the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Acura TLX, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Acura TLX, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Acura TLX, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any additional questions about the Acura TLX, do not hesitate to consult our Acura TLX category.
