You’re bored with listening to cassettes and only having the capacity to listent to the radio, while your smart phone is loaded with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve posted this article content to help you, because right now you’re going to learn about how to install a car radio on your Acura TL. To accomplish this, first we will see how to remove the old car radio, then how to install a car radio on Acura TL and finally, how to connect it.
How to install car radio on Acura TL: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Acura TL, there is one essential step, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two options determined by the stereo that equips your Acura TL:
- Original car radio:
In cases like this, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Acura TL. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Acura TL: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Acura TL. Ahead of time, take the time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Acura TL, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Acura TL, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Acura TL, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To get more tips on the Acura TL, take a look at the Acura TL category.
