You’re uninterested in listening to cassettes and only having the capability to listent to the radio, while your phone is filled with your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve created this article to help you, because now you’re going to learn about how to install a car radio on your Acura RDX. To make this happen, first of all we will discover how to remove the old car radio, then how to install a car radio on Acura RDX and to finish, how to connect it.

install-car-radio-acura-rdx

How to install car radio on Acura RDX: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Acura RDX, there is one fundamental task, take off the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions dependent on the stereo that equips your Acura RDX:

  • Original car radio:
    In this instance, you’ll have to be persistent, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Acura RDX. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this situation the process is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Acura RDX: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your Acura RDX. Ahead of time, spend some time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Acura RDX, once placed, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Acura RDX, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Acura RDX, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

If you have any additional questions about the Acura RDX, do not hesitate to consult our Acura RDX category.