You’re tired of listening to cassettes and only having the capability to listent to the radio, while your smart phone is loaded with your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve written this content page to help you, because right now you’re going to learn about how to install a car radio on your Acura MDX. To get this done, first of all we will find out how to remove the old car radio, then how to install a car radio on Acura MDX and at last, how to connect it.
How to install car radio on Acura MDX: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Acura MDX, there is one essential task, take out the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two methods based on the stereo that equips your Acura MDX:
- Original car radio:
In this instance, you’ll have to be persistent, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Acura MDX. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the method is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Acura MDX: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Acura MDX. Ahead of time, take the time to examine the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Acura MDX, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Acura MDX, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Acura MDX, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
Whenever you have any additional questions about the Acura MDX, do not hesitate to consult our Acura MDX category.
