Regardless of you need to move house, go on holiday with a caravan, get rid of of green waste, or have a hitch is pretty handy. In this post, we will describe the electrical connection of a trailer hitch of a Subaru Outback . In truth, regardless if the set up process is not difficult, it is required to explain some details to consider this task without any issue. First of all, we will see what the electrical wiring harness of your motor vehicle hitch contains, then, in a second step, how to make the electrical connection of the hitch of a Subaru Outback .
What’s the wiring harness for a Subaru Outback hitch trailer?
Why do we have to connect a wiring harness with the hitch trailer of a Subaru Outback?
So we will start our content page by explaining the fundamentals of a wiring harness of a Subaru Outback. In order to understand how it works, you must previously understand its necessity. If you have a trailer or a caravan to tow, it is necessary and earlier all mandatory by the highway code to respect certain rules, here they are:
- A solid chassis for the trailer…
- Wheels that fit.
- An electrical connection.
- A license plate in plain sight.
- A stoplight repeater.
- A traffic light repeater.
- A blinker repeater.
- License plate illumination.
- A fog light repeater.
In order to fulfill all the electrical obligations, you will need to install a wiring harness connection on the hitch trailer of your Subaru Outback . We will focus on this in this article, if you want to discover how to install the hitch of a Subaru Outback, please see our content page on this theme.
What is the electrical connection of the trailer hitch of a Subaru Outback?
We will now quickly describe how the electrical connection of your hitch works. The connection uses the 12-volt current from your motor vehicle to power the hitch lights on your Subaru Outback. There are two different systems of electrical connection for a hitch, here they are:
- The 7-pin electric plug for a Subaru Outback trailer, 7 pins : This is the traditional plug that will be discovered on all Subaru Outback hitches. This electrical connection will enable you to transmit all the lighting functions needed for the rear signalling of your trailer, you will discover a plug for each function (left and right indicators, ground, fog light, left and right position light, left and right brake light).
- Electrical connection for caravan with 13-pin plug for Subaru Outback: This plug system is principally used for caravans that require 12 volts inside to supply the various electrical equipment in the cabin. This kind of connection necessitates the use of an adapter. The extra pins will bring the 12 volt power permanently (to recharge a battery in the caravan) and the 12 volt power in use (to use the 12 volt equipment when the car is switched on).
How do I hook up the wiring harness of a Subaru Outback?
To end this content page, we will quickly describe you how to make the connection of the wiring harness of your Subaru Outback .
How to make the connection of the wiring harness of an old Subaru Outback?
To mount the wiring harness of an old Subaru Outback, you will have to go and get all the required cables in the rear lights of this one. We recommend you to call in a motor vehicle electrician for this intervention because it is difficult, but we will nevertheless summarize the most important steps to be accomplished:
- Take out the trunk lining from your Subaru Outback to access the rear light unit.
- Locate the wires that correspond to each of the taillight functions.
- Connect them to the lugs on the wiring harness on your hitch.
- Close the whole thing down.
How do you connect the wiring harness of a recent Subaru Outback?
For new Subaru Outbacks, the wiring harness is much less complicated to connect:
- You can use a multiplexable box, you will discover particular ones for your Subaru Outback and universal models. It’s up to you to select according to your budget, know that a universal version costs between 30 and 60 euros.
- Take out the trunk lining from your Subaru Outback so that you can route the cables from your box to the front of your Subaru Outback and connect them to your fuse box.
- Install the circumstance in the trunk properly.
- You don’t have to retrieve your cables from the trunk and connect them to your outlet.
0
How do you hook up the power to a trailer on Subaru Outback?
Finally, to end this content page we will quickly describe you how to make the electrical connection of a caravan on your Subaru Outback . To do this you will automatically have to go through one of the previous steps, it’s up to you to select the one that means your model and your budget. After you have conducted this, the last step will be to buy an adapter that goes from a 7-pin plug to a 13-pin plug so that you can benefit from the 12 volt current in your caravan. These adapters come at different prices, you will need to count between 15 and 40 euros. All you have to do is plug it into your 7-pin plug.
In the event that you have any additional questions about the Subaru Outback, do not hesitate to consult our Subaru Outback category.
