Whether you need to move house, go on vacation with a caravan, get rid of of green waste, or have a hitch is fairly handy. In this post, we will show you the electrical connection of a trailer hitch of a Chevrolet Impala . Obviously, even if the set up process is not difficult, it is required to clarify some points to consider this work without any problem. Firstly, we will discover what the electrical wiring harness of your car hitch consists of, then, in a second step, how to make the electrical connection of the hitch of a Chevrolet Impala .

install-trailer-hitchchevrolet-impala

What’s the wiring harness for a Chevrolet Impala hitch trailer?

Why do we have to connect a wiring harness with the hitch trailer of a Chevrolet Impala?

So we will begin our content by detailing the basics of a wiring harness of a Chevrolet Impala. In order to understand how it functions, you must already understand its necessity. If you have a trailer or a caravan to tow, it is important and earlier all mandatory by the highway code to respect certain requirements, here they are:

  • A solid chassis for the trailer…
  • Wheels that fit.
  • An electrical connection.
  • A license plate in plain sight.
  • A stoplight repeater.
  • A traffic light repeater.
  • A blinker repeater.
  • License plate illumination.
  • A fog light repeater.

In order to fulfill all the electrical regulations, you will need to install a wiring harness connection on the hitch trailer of your Chevrolet Impala . We will concentrate on this in this post, if you want to discover how to install the hitch of a Chevrolet Impala, please discover our content on this theme.

What is the electrical connection of the trailer hitch of a Chevrolet Impala?

We will now fairly quickly show you how the electrical connection of your hitch functions. The connection uses the 12-volt current from your car to power the hitch lights on your Chevrolet Impala. There are two different systems of electrical connection for a hitch, here they are:

  • The 7-pin electric plug for a Chevrolet Impala trailer, 7 pins : This is the traditional plug that will be located on all Chevrolet Impala hitches. This electrical connection will allow you to transmit all the lighting functions needed for the rear signalling of your trailer, you will discover a plug for each action (left and right indicators, ground, fog light, left and right position light, left and right brake light).
  • Electrical connection for caravan with 13-pin plug for Chevrolet Impala: This plug system is mainly used for caravans that involve 12 volts inside to supply the different electrical devices in the cabin. This sort of connection necessitates the use of an adapter. The extra pins will bring the 12 volt power permanently (to recharge a battery in the caravan) and the 12 volt power in use (to use the 12 volt equipment when the motor vehicle is switched on).

How do I hook up the wiring harness of a Chevrolet Impala?

To end this content, we will fairly quickly show you you how to produce the connection of the wiring harness of your Chevrolet Impala .

How to make the connection of the wiring harness of an old Chevrolet Impala?

To mount the wiring harness of an old Chevrolet Impala, you will have to go and get all the required cables in the rear lights of this one. We suggest you to call in a car electrician for this intervention because it is difficult, but we will nevertheless summarize the most important steps to be performed:

  • Remove the trunk lining from your Chevrolet Impala to access the rear light unit.
  • Locate the wires that correspond to each of the taillight functions.
  • Connect them to the lugs on the wiring harness on your hitch.
  • Close the whole thing down.

How do you connect the wiring harness of a recent Chevrolet Impala?

For modern Chevrolet Impalas, the wiring harness is much easier to connect:

  • You can use a multiplexable box, you will discover particular ones for your Chevrolet Impala and universal models. It’s up to you to select according to your budget, know that a universal version costs between 30 and 60 euros.
  • Remove the trunk lining from your Chevrolet Impala so that you can route the cables from your box to the front of your Chevrolet Impala and connect them to your fuse box.
  • Install the circumstance in the trunk effectively.
  • 0

  • You don’t have to retrieve your cables from the trunk and connect them to your outlet.

How do you hook up the power to a trailer on Chevrolet Impala?

Finally, to end this content we will fairly quickly show you you how to produce the electrical connection of a caravan on your Chevrolet Impala . To get this done you will inevitably have to go through one of the previous steps, it’s up to you to select the one that points your model and your budget. After you have conducted this, the last step will be to buy an adapter that goes from a 7-pin plug to a 13-pin plug so that you can benefit from the 12 volt current in your caravan. These adapters come at different prices, you will need to count between 15 and 40 euros. All you have to do is plug it into your 7-pin plug.

If you need more guides on the Chevrolet Impala, go to our Chevrolet Impala category.