Having a large motor vehicle is agreeable, you have a considerable interior room, regardless whether you wish to easily carry several travellers, go on the road, relocate, or any other project that will require interior volume. But, not many of us are lucky enough to have large vehicles, so sometimes you have to fold down the back seat of your CUPRA FORMENTOR to gain a little volume. While this task might seem to be common, on some vehicles it’s not necessarily instinctive. To support you carry out this task, we decided to create this content page to reveal to you how to fold the back seat of your CUPRA FORMENTOR depending to the system uour car is equipped with. To do this, first we will take a look at the rear seat belt systems, then the push button systems and finally the pull-down systems.
How to fold down the back seat of my CUPRA FORMENTOR: Model with string / strap
First, we begin this content page by looking at the CUPRA FORMENTOR models that are outfitted with a system for folding the rear seats with straps or strings. This type of feature is not the most generic, but depending on the year and series of your CUPRA FORMENTOR, it is possible that yours itself is equipped. To examine this, nothing could be less difficult, look between the seats, whether on the seat part or on the backrest part accessible from the boot, you should see coloured straps or strings show up between the gaps of the seats. Once you’ve found the gaps, you’ll basically have to pull on them while pushing the seat back simultaneously to fold it down. You must duplicate the methodology for each of the seats or sections of your bench depending to the layout you have. Now you’ve just discovered the first technique of how to fold the back seat of your CUPRA FORMENTOR.
How to fold down the back seat of my CUPRA FORMENTOR: Knob model at the level of the backrests.
Let’s keep going with the second method. This one is carried out on different types of benches. Indeed, the push button model is more classic, we will focus on the method to adopt to fold the back seat of your CUPRA FORMENTOR if you have buttons located at the level of the backrests / headrests of your bench. This layout is more typical and you should be able to do it even easier. You will need to identify these buttons, usually there are two, one at each end of the seat, close to the upper seat belt clip, and once found, come at the same time, one by one, to operate them and push the seat back to flip it forward and fold down the rear seat of your CUPRA FORMENTOR.
How to fold down the rear seat of my CUPRA FORMENTOR: Pull button model at seat level
To finish , the last method that will reveal to you how to fold down the back seat of your CUPRA FORMENTOR is the versions that are outfitted with buttons / levers that are located between the seats of your car. at the level of the seat belt locking clip. These are levers that will need to be operated to release the movement of the backrests of the rear seat of your CUPRA FORMENTOR. Always the same methodology, you will have to perform the action of pressing on the backrests at the same time with the pressure on the lever. If you need even more space in your motor vehicle, you may be considering finding out how to remove the rear seat of your CUPRA FORMENTOR.
If you have any additional questions about the CUPRA FORMENTOR, do not hesitate to consult our CUPRA FORMENTOR category.
