The battery of your vehicle is a wearing component, it is most of the time considered that it will have between 5 and 6 years of life. You may have found yourself one day without a battery and not having the ability to start your Volkswagen Polo. And generally this is caused by a battery that no longer stores energy. So in this case, how do I disconnect the battery from my Volkswagen Polo? Precisely, our team has written and published this content in order to help you perform this common task safely and securely. First, we will give you some suggestions on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Volkswagen Polo.

disconnect-battery-volkswagen-polo

How to disconnect the battery on my Volkswagen Polo: A few tips

First of all, before dealing with how to disconnect the battery from your Volkswagen Polo, we will give you a few recommendations on how to do this process securely and save you from wasting time, some of them will absolutely sound obvious to you, but you can never be too careful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to avoid any movement of the Volkswagen Polo.
  • The battery in your car is an energy accumulator, and can possibly generate a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to make certain you take as little risk as possible.
  • In addition to being filled with energy, the battery will be filled with acid, a very corrosive chemical substance that can do a lot of damage to your skin. As a precaution, wear rubber gloves and goggles to protect you from splashing.
  • At last when you go to the section how to disconnect the battery on your Volkswagen Polo, don’t touch the two terminals of your battery, you may cause a short circuit with your body as a conductor.

How to disconnect a battery on my Volkswagen Polo: Take action

Let’s start now, the part that absolutely brings you on this website, how to disconnect a battery on your Volkswagen Polo. So, after having taken all the precautions we described just before, you will finally be able to attack the removal of the battery from your car. To do this, it will be quite easy. First you will have to take away the plastic covers that protect the terminals of your battery. Verify the state of your terminals, if they are oxidized or very dirty, we advise you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is completed, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this direction as it is attached to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would create a short circuit. Now you can disconnect the positive terminal of the battery from your Volkswagen Polo. Once both terminals are disconnected, you can begin the last step, disconnect the battery from the engine compartment of your car. To accomplish this, you just have to remove the rod and the clamp, generally held by a nut or a torx bolt, and take it out of its place. Watch out though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to avoid any acid leakage. That’s it, you have just discovered the technique for how to disconnect a battery on your Volkswagen Polo, if you stick to all the safety instructions, everything should go well. If you want to learn how to safely reconnect your battery, check out this content, and if you want more information about your Volkswagen Polo, we have a directory of articles dedicated to your car.

If perhaps you have any further questions about the Volkswagen Polo, do not hesitate to consult our Volkswagen Polo category.