The battery of your vehicle is a wearing component, it is generally considered that it will have between 5 and 6 years of life span. You may have found yourself one day with a dead battery and not being able to turn on your Subaru Outback. And generally this is caused by a battery that no longer stores energy. So in cases like this, how do I disconnect the battery from my Subaru Outback? Precisely, our team has created this article to be able to help you perform this simple procedure safely and securely. First of all, we will give you some recommendations on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Subaru Outback.

disconnect-battery-subaru-outback

How to disconnect the battery on my Subaru Outback: A few tips

To begin with, before tackling how to disconnect the battery from your Subaru Outback, we will give you a few hints on how to do this process safely and save you from wasting time, some of them will absolutely sound evident to you, but you can never be too cautious :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Subaru Outback.
  • The battery in your car is an energy accumulator, and can possibly generate a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to be sure you take as little risk as possible.
  • Furthermore to being filled with energy, the battery will be filled with acid, a very corrosive chemical substance that can do a lot of damage to your skin. As a safety measure, wear rubber gloves and goggles to protect you from splashing.
  • To finish when you go to the section how to disconnect the battery on your Subaru Outback, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.

How to disconnect a battery on my Subaru Outback: Take action

Let’s start now, the section that absolutely brings you in this article, how to disconnect a battery on your Subaru Outback. So, after having taken all the safety measures we listed just above, you will finally be able to start the removal of the battery from your car. For this, it will be quite easy. First you will have to remove the plastic covers that protect the terminals of your battery. Observe the state of your terminals, if they are oxidized or very dirty, we encourage you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is conducted, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this direction as it is linked to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would bring about a short circuit. Now you can disconnect the positive terminal of the battery from your Subaru Outback. Once both terminals are disconnected, you can start the last step, disconnect the battery from the engine compartment of your car. To do this, you just have to remove the rod and the clamp, generally held by a nut or a torx bolt, and take it out of its place. Take care though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to avoid any acid leakage. That’s it, you have just discovered the technique for how to disconnect a battery on your Subaru Outback, if you follow all the safety guidelines, everything should go well. If you want to find out how to safely reconnect your battery, check out this article, and if you want more information about your Subaru Outback, we have a directory of articles dedicated to your car.

Whenever you have any further questions about the Subaru Outback, do not hesitate to consult our Subaru Outback category.