The battery of your vehicle is a wearing part, it is generally considered that it will have between 5 and 6 years of life. You may have found yourself one day without a battery and not having the capability to start your Ram P/U. And frequently this is caused by a battery that no longer stores energy. So in cases like this, how do I disconnect the battery from my Ram P/U? Precisely, our team has created this content to be able to help you do this simple task safely and securely. First, we will give you some suggestions on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Ram P/U.

disconnect-battery-ram-p/u

How to disconnect the battery on my Ram P/U: A few tips

Firstly, before tackling how to disconnect the battery from your Ram P/U, we will give you a few tips on how to do this procedure safely and save you from wasting time, some of them will undoubtedly seem to be obvious to you, but you can never be too cautious :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Ram P/U.
  • The battery in your car is an energy accumulator, and can likely deliver a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to ensure that you take as little risk as possible.
  • Additionally to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a precaution safeguard, wear rubber gloves and goggles to protect you from splashing.
  • To finish when you go to the section how to disconnect the battery on your Ram P/U, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.

How to disconnect a battery on my Ram P/U: Take action

Let’s begin now, the part that undoubtedly brings you here, how to disconnect a battery on your Ram P/U. So, after having taken all the precautions we described just before, you will finally be able to start the removal of the battery from your car. To do this, it will be quite simple. First you will have to take away the plastic covers that protect the terminals of your battery. Check the state of your terminals, if they are oxidized or very dirty, we recommend you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is carried out, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is linked to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would bring about a short circuit. Now you can disconnect the positive terminal of the battery from your Ram P/U. Once both terminals are disconnected, you can begin the last step, disconnect the battery from the engine compartment of your car. To accomplish this, you just have to remove the rod and the clamp, commonly held by a nut or a torx bolt, and take it out of its place. Watch out though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to prevent any acid leakage. That’s it, you have just learned the method for how to disconnect a battery on your Ram P/U, if you stick to all the safety instructions, everything should go well. If you want to find out how to safely reconnect your battery, check out this content, and if you want more information about your Ram P/U, we have a directory of articles dedicated to your automobile.

To get more tips on the Ram P/U, take a look at the Ram P/U category.