The battery of your car is a wearing part, it is most of the time considered that it will have between 5 and 6 years of life span. You may have found yourself one day with a dead battery and not having the capability to turn on your Peugeot Rifter. And generally this is caused by a battery that no longer stores energy. So in this case, how do I disconnect the battery from my Peugeot Rifter? Precisely, our team has written and published this article in order to help you do this simple task safely and securely. Initially, we will give you some hints and tips on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Peugeot Rifter.

disconnect-battery-peugeot-rifter

How to disconnect the battery on my Peugeot Rifter: A few tips

First of all, before dealing with how to disconnect the battery from your Peugeot Rifter, we will give you a few tips on how to do this process safely and save you from wasting time, some of them will certainly seem to be evident to you, but you can never be too careful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Peugeot Rifter.
  • The battery in your car is an energy accumulator, and can likely send out a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to ensure that you take as little risk as possible.
  • Additionally to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a precaution, wear rubber gloves and goggles to protect you from splashing.
  • To finish when you go to the section how to disconnect the battery on your Peugeot Rifter, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.

How to disconnect a battery on my Peugeot Rifter: Take action

Let’s start now, the section that certainly brings you on this page, how to disconnect a battery on your Peugeot Rifter. So, after having taken all the precautions we mentioned just above, you will finally be able to start the removal of the battery from your car. To do this, it will be quite simple. First you will have to take out the plastic covers that protect the terminals of your battery. Check the state of your terminals, if they are oxidized or very dirty, we suggest you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is completed, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is linked to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a part of the chassis, it would provoke a short circuit. Now you can disconnect the positive terminal of the battery from your Peugeot Rifter. Once both terminals are disconnected, you can start the last step, disconnect the battery from the engine compartment of your car. To achieve this, you just have to remove the rod and the clamp, in most cases held by a nut or a torx bolt, and take it out of its place. Be cautious though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to prevent any acid leakage. That’s it, you have just learned the process for how to disconnect a battery on your Peugeot Rifter, if you follow all the safety recommendations, everything should go well. If you want to learn how to safely reconnect your battery, check out this article, and if you want more information about your Peugeot Rifter, we have a directory of articles dedicated to your automobile.

To find more tips on the Peugeot Rifter, take a look at the Peugeot Rifter category.