The battery of your vehicle is a wearing part, it is most of the time considered that it will have between 5 and 6 years of life span. You may have found yourself one day with a dead battery and not being able to start your Mitsubishi Lancer. And in many instances this is the result of a battery that no longer stores energy. So in this case, how do I disconnect the battery from my Mitsubishi Lancer? Precisely, our team has made this article content to be able to help you do this basic task safely and securely. First of all, we will give you some advice on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Mitsubishi Lancer.

disconnect-battery-mitsubishi-lancer

How to disconnect the battery on my Mitsubishi Lancer: A few tips

First of all, before dealing with how to disconnect the battery from your Mitsubishi Lancer, we will give you a few hints on how to do this operation securely and save you from wasting time, some of them will definitely sound evident to you, but you can never be too mindful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to avoid any movement of the Mitsubishi Lancer.
  • The battery in your car is an energy accumulator, and can potentially generate a deadly charge to humans, so you will need to remember to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to make sure you take as little risk as possible.
  • In addition to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a precaution, wear rubber gloves and goggles to protect you from splashing.
  • At last when you go to the section how to disconnect the battery on your Mitsubishi Lancer, don’t touch the two terminals of your battery, you may cause a short circuit with your body as a conductor.

How to disconnect a battery on my Mitsubishi Lancer: Take action

Let’s begin now, the part that definitely brings you here, how to disconnect a battery on your Mitsubishi Lancer. So, after having taken all the measures we detailed just before, you will finally be able to attack the removal of the battery from your car. For this, it will be very simple. First you will have to remove the plastic covers that protect the terminals of your battery. Verify the state of your terminals, if they are oxidized or very dirty, we advise you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is conducted, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is connected to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would provoke a short circuit. Now you can disconnect the positive terminal of the battery from your Mitsubishi Lancer. Once both terminals are disconnected, you can commence the last step, disconnect the battery from the engine compartment of your car. To do this, you just have to remove the rod and the clamp, in most cases held by a nut or a torx bolt, and take it out of its place. Watch out though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to avoid any acid leakage. That’s it, you have just learned the method for how to disconnect a battery on your Mitsubishi Lancer, if you respect all the safety instructions, everything should go well. If you want to learn how to safely reconnect your battery, check out this article content, and if you want more information about your Mitsubishi Lancer, we have a directory of articles dedicated to your automobile.

If you have any further questions about the Mitsubishi Lancer, do not hesitate to consult our Mitsubishi Lancer category.