The battery of your vehicle is a wearing part, it is generally considered that it will have between 5 and 6 years of life. You may have found yourself one day without a battery and not having the capability to start your Land Rover Discovery. And quite often this is attributable to a battery that no longer stores energy. So in this case, how do I disconnect the battery from my Land Rover Discovery? Precisely, our team has made this article content to be able to help you perform this basic task safely and securely. First of all, we will give you some suggestions on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Land Rover Discovery.

disconnect-battery-land-rover-discovery

How to disconnect the battery on my Land Rover Discovery: A few tips

To begin with, before dealing with how to disconnect the battery from your Land Rover Discovery, we will give you a few tips on how to do this procedure safely and save you from wasting time, some of them will absolutely sound obvious to you, but you can never be too careful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to avoid any movement of the Land Rover Discovery.
  • The battery in your car is an energy accumulator, and can possibly generate a deadly charge to humans, so you will need to bear in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to make sure you take as little risk as possible.
  • Furthermore to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a preventative measure, wear rubber gloves and goggles to protect you from splashing.
  • Finally when you go to the step how to disconnect the battery on your Land Rover Discovery, don’t touch the two terminals of your battery, you may cause a short circuit with your body as a conductor.

How to disconnect a battery on my Land Rover Discovery: Take action

Let’s start now, the part that absolutely brings you on this website, how to disconnect a battery on your Land Rover Discovery. So, after having taken all the safety measures we detailed just above, you will finally be able to start the removal of the battery from your car. For this, it will be quite easy. First you will have to take off the plastic covers that protect the terminals of your battery. Check the state of your terminals, if they are oxidized or very dirty, we recommend you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is conducted, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this direction as it is linked to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a part of the chassis, it would trigger a short circuit. Now you can disconnect the positive terminal of the battery from your Land Rover Discovery. Once both terminals are disconnected, you can start the last step, disconnect the battery from the engine compartment of your car. To do this, you just have to remove the rod and the clamp, generally held by a nut or a torx bolt, and take it out of its place. Watch out though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to avoid any acid leakage. That’s it, you have just discovered the technique for how to disconnect a battery on your Land Rover Discovery, if you respect all the safety recommendations, everything should go well. If you want to find out how to safely reconnect your battery, check out this article content, and if you want more information about your Land Rover Discovery, we have a directory of articles dedicated to your automobile.

If you want more tutorials on the Land Rover Discovery, go to our Land Rover Discovery category.