The battery of your car is a wearing part, it is most of the time considered that it will have between 5 and 6 years of life span. You may have found yourself one morning without a battery and not being able to start your Jeep Wrangler. And generally this is attributable to a battery that no longer stores energy. So in this instance, how do I disconnect the battery from my Jeep Wrangler? Precisely, our team has posted this content page to be able to help you carry out this simple procedure safely. First, we will give you some hints and tips on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Jeep Wrangler.

disconnect-battery-jeep-wrangler

How to disconnect the battery on my Jeep Wrangler: A few tips

To begin with, before tackling how to disconnect the battery from your Jeep Wrangler, we will give you a few recommendations on how to do this process safely and save you from wasting time, some of them will absolutely sound obvious to you, but you can never be too mindful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to avoid any movement of the Jeep Wrangler.
  • The battery in your car is an energy accumulator, and can potentially send out a deadly charge to humans, so you will need to remember to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to be certain you take as little risk as possible.
  • Moreover to being filled with energy, the battery will be filled with acid, a very corrosive chemical substance that can do a lot of damage to your skin. As a precaution safeguard, wear rubber gloves and goggles to protect you from splashing.
  • At last when you go to the section how to disconnect the battery on your Jeep Wrangler, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.

How to disconnect a battery on my Jeep Wrangler: Take action

Let’s begin now, the part that absolutely brings you in this article, how to disconnect a battery on your Jeep Wrangler. So, after having taken all the precautions we described just before, you will finally be able to attack the removal of the battery from your car. To do this, it will be fairly simple. First you will have to take off the plastic covers that protect the terminals of your battery. Check the state of your terminals, if they are oxidized or very dirty, we encourage you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is carried out, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this direction as it is attached to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would bring about a short circuit. Now you can disconnect the positive terminal of the battery from your Jeep Wrangler. Once both terminals are disconnected, you can start the last step, disconnect the battery from the engine compartment of your car. To do this, you just have to remove the rod and the clamp, usually held by a nut or a torx bolt, and take it out of its place. Watch out though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to avoid any acid leakage. That’s it, you have just discovered the method for how to disconnect a battery on your Jeep Wrangler, if you stick to all the safety guidelines, everything should go well. If you want to learn how to safely reconnect your battery, check out this content page, and if you want more information about your Jeep Wrangler, we have a directory of articles dedicated to your vehicle.

If you want more guides on the Jeep Wrangler, go to our Jeep Wrangler category.