The battery of your vehicle is a wearing component, it is generally considered that it will have between 5 and 6 years of life. You may have found yourself one morning without a battery and not being able to start your Jeep Patriot. And often times this is brought on by a battery that no longer stores energy. So in this case, how do I disconnect the battery from my Jeep Patriot? Precisely, our team has written this article content to be able to help you perform this simple procedure safely and securely. First of all, we will give you some hints and tips on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Jeep Patriot.

disconnect-battery-jeep-patriot

How to disconnect the battery on my Jeep Patriot: A few tips

Firstly, before dealing with how to disconnect the battery from your Jeep Patriot, we will give you a few recommendations on how to do this process safely and save you from wasting time, some of them will undoubtedly sound evident to you, but you can never be too careful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Jeep Patriot.
  • The battery in your car is an energy accumulator, and can possibly generate a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to be sure you take as little risk as possible.
  • Moreover to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a preventative measure, wear rubber gloves and goggles to protect you from splashing.
  • To finish when you go to the section how to disconnect the battery on your Jeep Patriot, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.

How to disconnect a battery on my Jeep Patriot: Take action

Let’s start now, the part that undoubtedly brings you on this page, how to disconnect a battery on your Jeep Patriot. So, after having taken all the measures we mentioned just before, you will finally be able to start the removal of the battery from your car. To do this, it will be quite simple. First you will have to take away the plastic covers that protect the terminals of your battery. Check the state of your terminals, if they are oxidized or very dirty, we suggest you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is done, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is attached to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a part of the chassis, it would bring about a short circuit. Now you can disconnect the positive terminal of the battery from your Jeep Patriot. Once both terminals are disconnected, you can commence the last step, disconnect the battery from the engine compartment of your car. To accomplish this, you just have to remove the rod and the clamp, in most cases held by a nut or a torx bolt, and take it out of its place. Watch out though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to prevent any acid leakage. That’s it, you have just learned the technique for how to disconnect a battery on your Jeep Patriot, if you stick to all the safety recommendations, everything should go well. If you want to learn how to safely reconnect your battery, check out this article content, and if you want more information about your Jeep Patriot, we have a directory of articles dedicated to your vehicle.

If you need more tutorials on the Jeep Patriot, go to our Jeep Patriot category.