The battery of your car is a wearing component, it is generally considered that it will have between 5 and 6 years of life span. You may have found yourself one morning without a battery and not having the ability to start your Jeep Cherokee. And often this is caused by a battery that no longer stores energy. So in this case, how do I disconnect the battery from my Jeep Cherokee? Precisely, our team has created this article content to be able to help you perform this basic procedure safely and securely. First of all, we will give you some recommendations on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Jeep Cherokee.

disconnect-battery-jeep-cherokee

How to disconnect the battery on my Jeep Cherokee: A few tips

First of all, before dealing with how to disconnect the battery from your Jeep Cherokee, we will give you a few suggestions on how to do this operation safely and save you from wasting time, some of them will certainly seem obvious to you, but you can never be too mindful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to avoid any movement of the Jeep Cherokee.
  • The battery in your car is an energy accumulator, and can possibly deliver a deadly charge to humans, so you will need to bear in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to be certain you take as little risk as possible.
  • Moreover to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a precaution safeguard, wear rubber gloves and goggles to protect you from splashing.
  • Finally when you go to the section how to disconnect the battery on your Jeep Cherokee, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.

How to disconnect a battery on my Jeep Cherokee: Take action

Let’s commence now, the section that certainly brings you on this website, how to disconnect a battery on your Jeep Cherokee. So, after having taken all the measures we mentioned just above, you will finally be able to start the removal of the battery from your car. To do this, it will be fairly simple. First you will have to take off the plastic covers that protect the terminals of your battery. Observe the state of your terminals, if they are oxidized or very dirty, we suggest you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is conducted, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this direction as it is connected to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would bring about a short circuit. Now you can disconnect the positive terminal of the battery from your Jeep Cherokee. Once both terminals are disconnected, you can commence the last step, disconnect the battery from the engine compartment of your car. To do this, you just have to remove the rod and the clamp, in most cases held by a nut or a torx bolt, and take it out of its place. Take care though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to prevent any acid leakage. That’s it, you have just discovered the process for how to disconnect a battery on your Jeep Cherokee, if you respect all the safety recommendations, everything should go well. If you want to find out how to safely reconnect your battery, check out this article content, and if you want more information about your Jeep Cherokee, we have a directory of articles dedicated to your automobile.

To get more tips on the Jeep Cherokee, take a look at the Jeep Cherokee category.