The battery of your car is a wearing part, it is commonly considered that it will have between 5 and 6 years of life span. You may have found yourself one day with a dead battery and not being able to start your Hyundai Kona. And frequently this is attributable to a battery that no longer stores energy. So in this instance, how do I disconnect the battery from my Hyundai Kona? Precisely, our team has written this content in order to help you perform this common procedure safely. First, we will give you some advice on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Hyundai Kona.

disconnect-battery-hyundai-kona

How to disconnect the battery on my Hyundai Kona: A few tips

To begin with, before tackling how to disconnect the battery from your Hyundai Kona, we will give you a few recommendations on how to do this operation securely and save you from wasting time, some of them will certainly seem to be evident to you, but you can never be too mindful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Hyundai Kona.
  • The battery in your car is an energy accumulator, and can likely send out a deadly charge to humans, so you will need to remember to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to ensure you take as little risk as possible.
  • Additionally to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a precaution, wear rubber gloves and goggles to protect you from splashing.
  • Finally when you go to the step how to disconnect the battery on your Hyundai Kona, don’t touch the two terminals of your battery, you may cause a short circuit with your body as a conductor.

How to disconnect a battery on my Hyundai Kona: Take action

Let’s start now, the part that certainly brings you on this page, how to disconnect a battery on your Hyundai Kona. So, after having taken all the safety measures we detailed just before, you will finally be able to attack the removal of the battery from your car. For this, it will be quite simple. First you will have to remove the plastic covers that protect the terminals of your battery. Verify the state of your terminals, if they are oxidized or very dirty, we recommend you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is done, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is connected to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would trigger a short circuit. Now you can disconnect the positive terminal of the battery from your Hyundai Kona. Once both terminals are disconnected, you can start the last step, disconnect the battery from the engine compartment of your car. To achieve this, you just have to remove the rod and the clamp, in most cases held by a nut or a torx bolt, and take it out of its place. Take care though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to avoid any acid leakage. That’s it, you have just learned the method for how to disconnect a battery on your Hyundai Kona, if you follow all the safety instructions, everything should go well. If you want to find out how to safely reconnect your battery, check out this content, and if you want more information about your Hyundai Kona, we have a directory of articles dedicated to your automobile.

To discover more tips on the Hyundai Kona, take a look at the Hyundai Kona category.