The battery of your vehicle is a wearing part, it is commonly considered that it will have between 5 and 6 years of life span. You may have found yourself one morning with a dead battery and not having the ability to start your Dodge Challenger. And often this is brought on by a battery that no longer stores energy. So in this case, how do I disconnect the battery from my Dodge Challenger? Precisely, our team has created this content page in order to help you perform this simple procedure safely. Initially, we will give you some recommendations on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Dodge Challenger.

disconnect-battery-dodge-challenger

How to disconnect the battery on my Dodge Challenger: A few tips

Firstly, before tackling how to disconnect the battery from your Dodge Challenger, we will give you a few suggestions on how to do this procedure safely and save you from wasting time, some of them will undoubtedly seem obvious to you, but you can never be too careful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Dodge Challenger.
  • The battery in your car is an energy accumulator, and can likely send out a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to make sure you take as little risk as possible.
  • In addition to being filled with energy, the battery will be filled with acid, a very corrosive chemical substance that can do a lot of damage to your skin. As a preventative measure, wear rubber gloves and goggles to protect you from splashing.
  • To finish when you go to the section how to disconnect the battery on your Dodge Challenger, don’t touch the two terminals of your battery, you may cause a short circuit with your body as a conductor.

How to disconnect a battery on my Dodge Challenger: Take action

Let’s start now, the part that undoubtedly brings you in this article, how to disconnect a battery on your Dodge Challenger. So, after having taken all the measures we mentioned just before, you will finally be able to attack the removal of the battery from your car. For this, it will be quite easy. First you will have to remove the plastic covers that protect the terminals of your battery. Observe the state of your terminals, if they are oxidized or very dirty, we advise you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is done, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is attached to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would provoke a short circuit. Now you can disconnect the positive terminal of the battery from your Dodge Challenger. Once both terminals are disconnected, you can start the last step, disconnect the battery from the engine compartment of your car. To accomplish this, you just have to remove the rod and the clamp, in most cases held by a nut or a torx bolt, and take it out of its place. Watch out though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to steer clear of any acid leakage. That’s it, you have just learned the methodology for how to disconnect a battery on your Dodge Challenger, if you respect all the safety recommendations, everything should go well. If you want to learn how to safely reconnect your battery, check out this content page, and if you want more information about your Dodge Challenger, we have a directory of articles dedicated to your automobile.

To get more tips on the Dodge Challenger, take a look at the Dodge Challenger category.