The battery of your car is a wearing part, it is commonly considered that it will have between 5 and 6 years of life span. You may have found yourself one day with a dead battery and not having the capability to start your Buick Envision. And quite often this is brought on by a battery that no longer stores energy. So in this instance, how do I disconnect the battery from my Buick Envision? Precisely, our team has made this article content to be able to help you do this common task safely and securely. First, we will give you some suggestions on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Buick Envision.
How to disconnect the battery on my Buick Envision: A few tips
First of all, before dealing with how to disconnect the battery from your Buick Envision, we will give you a few tips on how to do this procedure securely and save you from wasting time, some of them will surely seem to be evident to you, but you can never be too cautious :
- Before doing anything on your car, you must always place it on a flat surface with the hand brake on to avoid any movement of the Buick Envision.
- The battery in your car is an energy accumulator, and can likely deliver a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to make certain you take as little risk as possible.
- Furthermore to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a precaution safeguard, wear rubber gloves and goggles to protect you from splashing.
- Finally when you go to the section how to disconnect the battery on your Buick Envision, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.
How to disconnect a battery on my Buick Envision: Take action
Let’s begin now, the part that surely brings you in this article, how to disconnect a battery on your Buick Envision. So, after having taken all the precautions we listed just before, you will finally be able to attack the removal of the battery from your car. To do this, it will be very simple. First you will have to take off the plastic covers that protect the terminals of your battery. Check the state of your terminals, if they are oxidized or very dirty, we suggest you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is carried out, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is linked to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a part of the chassis, it would create a short circuit. Now you can disconnect the positive terminal of the battery from your Buick Envision. Once both terminals are disconnected, you can commence the last step, disconnect the battery from the engine compartment of your car. To accomplish this, you just have to remove the rod and the clamp, commonly held by a nut or a torx bolt, and take it out of its place. Watch out though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to prevent any acid leakage. That’s it, you have just discovered the methodology for how to disconnect a battery on your Buick Envision, if you respect all the safety recommendations, everything should go well. If you want to find out how to safely reconnect your battery, check out this article content, and if you want more information about your Buick Envision, we have a directory of articles dedicated to your vehicle.
To get more tips on the Buick Envision, take a look at the Buick Envision category.