The battery of your vehicle is a wearing component, it is generally considered that it will have between 5 and 6 years of life. You may have found yourself one morning with a dead battery and not being able to start your Acura TL. And often this is caused by a battery that no longer stores energy. So in this instance, how do I disconnect the battery from my Acura TL? Precisely, our team has posted this content in order to help you carry out this common task safely. Initially, we will give you some suggestions on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Acura TL.

disconnect-battery-acura-tl

How to disconnect the battery on my Acura TL: A few tips

To begin with, before tackling how to disconnect the battery from your Acura TL, we will give you a few hints on how to do this process securely and save you from wasting time, some of them will certainly sound evident to you, but you can never be too mindful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Acura TL.
  • The battery in your car is an energy accumulator, and can possibly send out a deadly charge to humans, so you will need to remember to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to ensure that you take as little risk as possible.
  • In addition to being filled with energy, the battery will be filled with acid, a very corrosive chemical substance that can do a lot of damage to your skin. As a preventative measure, wear rubber gloves and goggles to protect you from splashing.
  • To finish when you go to the step how to disconnect the battery on your Acura TL, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.

How to disconnect a battery on my Acura TL: Take action

Let’s start now, the section that certainly brings you here, how to disconnect a battery on your Acura TL. So, after having taken all the measures we listed just above, you will finally be able to start the removal of the battery from your car. To do this, it will be fairly simple. First you will have to take out the plastic covers that protect the terminals of your battery. Check the state of your terminals, if they are oxidized or very dirty, we advise you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is achieved, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is connected to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a part of the chassis, it would create a short circuit. Now you can disconnect the positive terminal of the battery from your Acura TL. Once both terminals are disconnected, you can begin the last step, disconnect the battery from the engine compartment of your car. To accomplish this, you just have to remove the rod and the clamp, usually held by a nut or a torx bolt, and take it out of its place. Take care though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to steer clear of any acid leakage. That’s it, you have just learned the method for how to disconnect a battery on your Acura TL, if you stick to all the safety guidelines, everything should go well. If you want to learn how to safely reconnect your battery, check out this content, and if you want more information about your Acura TL, we have a directory of articles dedicated to your automobile.

If you want more tutorials on the Acura TL, go to our Acura TL category.