How to disable the immobiliser Peugeot 807 ?

Your Peugeot 807 doesn’t want to start? Have you analyzed all kinds of things? Battery, alternator, spare keys… And you have the feeling that the problem comes from your immobiliser ? It is quite possible, indeed that it is in question if your car no longer wants to start or stalls when starting for no reason. You want to disable the immobiliser on your Peugeot 807 ? You are on the good website, we have created this article to help you see more clearly and resolve your problems related to this element. First, we will see how the immobiliser works on your Peugeot 807, then the different techniques to disable it.

How your immobiliser system works on Peugeot 807

Before describing the different solutions available to you, here is a short introduction to show you the role and operation of the immobilizer in your Peugeot 807. This electronic part came out 30 years ago and aspires to prevent the theft of your Peugeot 807. Indeed, thanks to a transponder and an antenna (coil) included in the key, and, a immobilisation control box included in the ECU and a reception antenna on the neiman, your Peugeot 807 will go each time you put the key in the ignition, it controls that the code emitted by your key is indeed the one asked by your immobilization box. It is only at this instant, that it will enable you to turn on your car. It is thanks to RFID technology (chip in the key) that this device will work.

First methodology, your key no longer allows your Peugeot 807 to start, you want to turn off the immobiliser of your Peugeot 807, but first of all you should try this process to start it and take it to a garage verify that you can not perform a less significant operation to bring back the normal start of your vehicle. Indeed, with your vehicle you should have a spare key (which you should try and which should start your Peugeot 807), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your vehicle by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to validate the digit and resume, duplicate the operation until you have entered the whole code. This should let you start your Peugeot 807 without having to remove the immobiliser.

Repair your key at a key specialist or your car dealership

If despite a battery change, several attempts to enter the immobiliser code on your Peugeot 807 still doesn’t want to start, it’s probably your key that’s at issue. We can understand that you still want to bypass the immobiliser device from your Peugeot 807. Indeed, your transponder must have been injured or must have fallen off your key. To resolve this problem, only solution, go to a key specialist (also available on the internet) or, at your car dealership who can restore your Peugeot 807 key. Depending on who you go to the repair should cost you about 100 euros if you still have a duplicate or your “code card” and about 350 euros at your car dealership if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Peugeot 807.

Manually remove your immobilizer

Although you may be tempted to bypass the immobilizer from your Peugeot 807, this is not advised at all for many reasons. First your Peugeot 807 would be much more vulnerable to theft attempts. Indeed, without an immobiliser box, simply doing “the wires” may be enough to turn your car on. Moreover to that, your insurance, in case of theft most likely won’t refund you if it knows that the immobiliser on your Peugeot 807 has been removed, bypassed or deactivated. This if you still want to do it, some sites still give the method, we have made the choice not to disclose it, because it could benefit people with bad intentions.

If perhaps you have any further questions about the Peugeot 807, do not hesitate to consult our Peugeot 807 category.