How to disable the immobiliser Peugeot 207 ?

Your Peugeot 207 doesn’t want to start? Have you analyzed all kinds of things? Battery, alternator, spare keys… And you have the feeling that the trouble comes from your immobiliser ? It is reasonably plausible, in fact that it is in question if your car doesn’t want to start anymore or stalls when starting without a reason. You want to disable the immobiliser on your Peugeot 207 ? You are on the good article, we have made this article to support you see more clearly and solve your problems connected to this part. First, we will see how the immobiliser functions on your Peugeot 207, then the different methods to disable it.

How your immobiliser system functions on Peugeot 207

Before explaining the different alternatives available to you, here is a short introduction to demonstrate the intent and functions of the immobilizer in your Peugeot 207. This electronic element came out 30 years ago and aims to prevent the theft of your Peugeot 207. Actually, thanks to a transponder and an antenna (coil) integrated in the key, and, a immobilisation control box integrated in the ECU and a reception antenna on the neiman, your Peugeot 207 will go each time you put the key in the ignition, it controls that the code emitted by your key is in fact the one asked by your immobilization box. It is only at this instant, that it will permit you to turn on your car. It is thanks to RFID technology (chip in the key) that this system will work.

First process, your key no longer allows your Peugeot 207 to start, you want to turn off the immobiliser of your Peugeot 207, but first of all you should try this technique to start it and take it to a garage check that you can not do a less important operation to bring back the normal start of your car. Actually, with your car you should have a spare key (which you should try and which should start your Peugeot 207), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your car by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to confirm the digit and resume, duplicate the operation until you have entered the entire code. This should allow your Peugeot 207 to start without having to remove the immobiliser.

Repair your key at a key specialist or your car dealership

If in spite of a battery change, several attempts to enter the immobiliser code on your Peugeot 207 still doesn’t want to start, it’s most likely your key that’s at issue. We can understand that you still want to bypass the immobiliser device from your Peugeot 207. Actually, your transponder must have been damaged or must have fallen off your key. To correct this trouble, only solution, go to a key specialist (also available on the internet) or, at your dealer who can restore your Peugeot 207 key. Based on who you go to the repair should cost you about 100 euros if you still have a copy or your “code card” and about 350 euros at your dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Peugeot 207.

Manually remove your immobilizer

Although you may be tempted to bypass the immobilizer from your Peugeot 207, this is not recommended at all for several reasons. First your Peugeot 207 would be much more vulnerable to theft attempts. Actually, without an immobiliser box, simply doing “the wires” may be enough to turn your car on. In addition to that, your insurance, in case of theft most likely won’t refund you if it knows that the immobiliser on your Peugeot 207 has been removed, bypassed or deactivated. This if you still want to do it, some websites online still give the method, we have made the choice not to disclose it, because it could help people with bad intentions.

Whenever you have any additional questions about the Peugeot 207, do not hesitate to consult our Peugeot 207 category.