How to disable the immobiliser Peugeot 106 ?

Your Peugeot 106 doesn’t want to start? Have you tested all kinds of things? Battery, alternator, spare keys… And you have the feeling that the issue emanates from your immobiliser ? It is reasonably possible, in fact that it is in question if your vehicule doesn’t want to start anymore or stalls when starting without a reason. You want to disable the immobiliser on your Peugeot 106 ? You are on the good website, we have created this post to support you see more clearly and solve your problems related to this part. First, we will see how the immobiliser works on your Peugeot 106, then the different ways to disable it.

How your immobiliser system works on Peugeot 106

Before describing the different alternatives available to you, here is a short intro to explain the goal and operation of the immobilizer in your Peugeot 106. This electronic element came out 30 years ago and intends to prevent the theft of your Peugeot 106. Indeed, thanks to a transponder and an antenna (coil) included in the key, and, a immobilisation control box included in the ECU and a reception antenna on the neiman, your Peugeot 106 will go each time you put the key in the ignition, it controls that the code emitted by your key is in fact the one expected by your immobilization box. It is only at this moment, that it will enable you to turn on your car. It is thanks to RFID technology (chip in the key) that this system will work.

First technique, your key no longer permits your Peugeot 106 to start, you want to deactivate the immobiliser of your Peugeot 106, but first of all you should try this technique to start it and take it to a mechanic check that you can not perform a less important process to reestablish the normal start of your car. Indeed, with your car you should have a spare key (which you should try and which should start your Peugeot 106), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your car by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to confirm the digit and resume, repeat the process until you have entered the entire code. This should enable you to start your Peugeot 106 without having to remove the immobiliser.

Repair your key at a key specialist or your car dealer

If even though a battery change, several attempts to enter the immobiliser code on your Peugeot 106 still doesn’t want to start, it’s almost certainly your key that’s at issue. We can understand that you still want to bypass the immobiliser system from your Peugeot 106. Indeed, your transponder must have been damaged or must have fallen off your key. To resolve this issue, only solution, go to a key specialist (also available on the internet) or, at your dealer who can repair your Peugeot 106 key. Depending on who you go to the repair should cost you about 100 euros if you still have a duplicate or your “code card” and about 350 euros at your dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Peugeot 106.

Manually remove your immobilizer

Although you may be tempted to bypass the immobilizer from your Peugeot 106, this is not recommended at all for several reasons. First your Peugeot 106 would be much more vulnerable to theft attempts. Indeed, without an immobiliser box, simply doing “the wires” may be enough to start it. Furthermore to that, your insurance, in case of theft most likely won’t refund you if it knows that the immobiliser on your Peugeot 106 has been removed, bypassed or deactivated. This if you still want to do it, some internet pages still give the process, we have made the choice not to disclose it, because it could benefit people with bad intentions.

If you want more tutorials on the Peugeot 106, go to our Peugeot 106 category.