How to disable the immobiliser Nissan Versa ?

Your Nissan Versa doesn’t want to start? Have you tried all sorts of things? Battery, alternator, spare keys… And you have the feeling that the problem emanates from your immobiliser ? It is actually quite plausible, indeed that it is in question if your car no longer wants to start or stalls when starting for no reason. You want to disable the immobiliser on your Nissan Versa ? You are in the right place, we have written this post to help you see more clearly and fix your trouble connected to this part. First, we will see how the immobiliser functions on your Nissan Versa, then the different ways to disable it.

How your immobiliser system functions on Nissan Versa

Before describing the different solutions available to you, here is a short introduction to describe the role and functions of the immobilizer in your Nissan Versa. This electronic component came out 30 years ago and aspires to prevent the theft of your Nissan Versa. Indeed, thanks to a transponder and an antenna (coil) included in the key, and, a immobilisation control box included in the ECU and a reception antenna on the neiman, your Nissan Versa will go each time you insert the key in the ignition, it controls that the code emitted by your key is indeed the one required by your immobilization box. It is only at this instant, that it will permit you to turn on your car. It is thanks to RFID technology (chip in the key) that this system will work.

First process, your key no longer allows your Nissan Versa to start, you want to turn off the immobiliser of your Nissan Versa, but first of all you should try this process to start it and take it to a mechanic check that you can not accomplish a less significant procedure to restore the normal start of your car. Indeed, with your car you should have a spare key (which you should try and which should start your Nissan Versa), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your car by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to validate the digit and resume, replicate the procedure until you have entered the entire code. This should enable you to start your Nissan Versa without having to remove the immobiliser.

Repair your key at a key specialist or your car dealership

If in spite of a battery swap, several attempts to enter the immobiliser code on your Nissan Versa still doesn’t work, it’s most likely your key that’s at issue. We can understand that you still want to bypass the immobiliser device from your Nissan Versa. Indeed, your transponder must have been affected or must have fallen off your key. To fix this problem, only solution, go to a key specialist (also available on the internet) or, at your car dealer who can fix your Nissan Versa key. Based on who you go to the repair should cost you about 100 euros if you still have a duplicate or your “code card” and about 350 euros at your car dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Nissan Versa.

Manually remove your immobilizer

Although you may be thinking to bypass the immobilizer from your Nissan Versa, this is not advised at all for different reasons. First your Nissan Versa would be much more vulnerable to theft attempts. Indeed, without an immobiliser box, simply doing “the wires” may be enough to turn your car on. Moreover to that, your insurance, in case of theft most likely won’t refund you if it finds out that the immobiliser on your Nissan Versa has been removed, bypassed or deactivated. This if you still want to do it, some internet pages still give the method, we have made the choice not to disclose it, because it could benefit people with bad intentions.

If you have any further questions about the Nissan Versa, do not hesitate to consult our Nissan Versa category.