How to disable the immobiliser Nissan NV200 ?

Your Nissan NV200 doesn’t want to start? Have you tried everything? Battery, alternator, spare keys… And you have the feeling that the issue emanates from your immobiliser ? It is reasonably plausible, indeed that it is in question if your automotive doesn’t want to start anymore or stalls when starting without a reason. You want to disable the immobiliser on your Nissan NV200 ? You are on the good website, we have written this post to support you see more clearly and resolve your concerns connected to this element. First, we will see how the immobiliser works on your Nissan NV200, then the different methods to disable it.

How your immobiliser system works on Nissan NV200

Before describing the different alternatives available to you, here is a short introduction to explain the role and functions of the immobilizer in your Nissan NV200. This electronic part came out 30 years ago and aspires to prevent the theft of your Nissan NV200. Indeed, thanks to a transponder and an antenna (coil) integrated in the key, and, a immobilisation control box integrated in the ECU and a reception antenna on the neiman, your Nissan NV200 will go each time you insert the key in the ignition, it controls that the code emitted by your key is indeed the one required by your immobilization box. It is only at this instant, that it will let you turn on your car. It is thanks to RFID technology (chip in the key) that this unit will work.

First process, your key no longer permits your Nissan NV200 to start, you want to deactivate the immobiliser of your Nissan NV200, but first of all you should try this process to start it and take it to a garage examine that you can not perform a less important procedure to reestablish the normal start of your car. Indeed, with your car you should have a spare key (which you should try and which should start your Nissan NV200), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your car by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to confirm the digit and resume, duplicate the procedure until you have entered the whole code. This should allow your Nissan NV200 to start without having to remove the immobiliser.

Fix your key at a key specialist or your dealer

If in spite of a battery swap, several tries to enter the immobiliser code on your Nissan NV200 still doesn’t want to start, it’s probably your key that’s at issue. We can understand that you still want to bypass the immobiliser device from your Nissan NV200. Indeed, your transponder must have been injured or must have fallen off your key. To fix this issue, only option, go to a key specialist (also available on the internet) or, at your car dealer who can fix your Nissan NV200 key. Depending on who you go to the repair should cost you about 100 euros if you still have a copy or your “code card” and about 350 euros at your car dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Nissan NV200.

Manually remove your immobilizer

Although you may be thinking to bypass the immobilizer from your Nissan NV200, this is not advised at all for different reasons. First your Nissan NV200 would be much more vulnerable to theft attempts. Indeed, without an immobiliser box, simply doing “the wires” may be enough to start it. In addition to that, your insurance, in case of theft most likely won’t refund you if it realizes that the immobiliser on your Nissan NV200 has been removed, bypassed or deactivated. This if you still want to do it, some websites online still give the method, we have made the choice not to disclose it, because it could benefit people with bad intentions.

If perhaps you have any additional questions about the Nissan NV200, do not hesitate to consult our Nissan NV200 category.