How to disable the immobiliser Honda Pilot ?

Your Honda Pilot doesn’t start anymore? Have you tried all sorts of things? Battery, alternator, spare keys… And you feel like the issue emanates from your immobiliser ? It is actually quite possible, in fact that it is in question if your vehicule doesn’t want to start anymore or stalls when starting for no reason. You want to disable the immobiliser on your Honda Pilot ? You are on the good article, we have written this content to support you see more clearly and resolve your trouble connected to this part. First, we will see how the immobiliser functions on your Honda Pilot, then the different ways to disable it.

How your immobiliser system functions on Honda Pilot

Before detailing the different solutions available to you, here is a short introduction to describe the goal and functions of the immobilizer in your Honda Pilot. This electronic element appeared 30 years ago and aspires to prevent the theft of your Honda Pilot. Actually, thanks to a transponder and an antenna (coil) included in the key, and, a immobilisation control box included in the ECU and a reception antenna on the neiman, your Honda Pilot will go each time you put the key in the ignition, it checks that the code emitted by your key is in fact the one asked by your immobilization box. It is only at this moment, that it will allow you to turn on your car. It is thanks to RFID technology (chip in the key) that this system will work.

First technique, your key no longer permits your Honda Pilot to start, you want to turn off the immobiliser of your Honda Pilot, but first of all you should try this process to start it and take it to a mechanic check that you can not accomplish a less important operation to bring back the normal start of your automobile. Actually, with your automobile you should have a spare key (which you should try and which should start your Honda Pilot), but if you don’t have it you should at least have the “code card”, it includes the start code. Thanks to this code, you will still be able to start your automobile by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to confirm the digit and resume, repeat the operation until you have entered the whole code. This should let you start your Honda Pilot without having to remove the immobiliser.

Repair your key at a key specialist or your car dealership

If even though a battery change, several tries to enter the immobiliser code on your Honda Pilot still doesn’t work, it’s probably your key that’s at issue. We can understand that you still want to bypass the immobiliser system from your Honda Pilot. Actually, your transponder must have been damaged or must have fallen off your key. To correct this issue, only solution, go to a key specialist (also available on the internet) or, at your dealer who can fix your Honda Pilot key. Determined by who you go to the repair should cost you about 100 euros if you still have a copy or your “code card” and about 350 euros at your dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Honda Pilot.

Manually remove your immobilizer

Although you may be tempted to bypass the immobilizer from your Honda Pilot, this is not advised at all for some reasons. First your Honda Pilot would be much more vulnerable to theft attempts. Actually, without an immobiliser box, simply doing “the wires” may be enough to turn your car on. In addition to that, your insurance, in case of theft most likely won’t refund you if it finds out that the immobiliser on your Honda Pilot has been removed, bypassed or deactivated. This if you still want to do it, some websites online still give the methodology, we have made the choice not to disclose it, because it could benefit people with bad intentions.

Whenever you have any further questions about the Honda Pilot, do not hesitate to consult our Honda Pilot category.