Your Audi Sq7 doesn’t want to start? Have you tested everything? Battery, alternator, spare keys… And you have the feeling that the trouble emanates from your immobiliser ? It is certainly possible, in fact that it is in question if your car doesn’t want to start anymore or stalls when starting for no reason. You want to disable the immobiliser on your Audi Sq7 ? You are on the good website, we have made this article to support you see more clearly and solve your trouble connected to this component. First, we will see how the immobiliser functions on your Audi Sq7, then the different methods to disable it.
How your immobiliser system functions on Audi Sq7
Before explaining the different solutions available to you, here is a short introduction to show you the role and operation of the immobilizer in your Audi Sq7. This electronic component was invented 30 years ago and intends to prevent the theft of your Audi Sq7. Indeed, thanks to a transponder and an antenna (coil) included in the key, and, a immobilisation control box included in the ECU and a reception antenna on the neiman, your Audi Sq7 will go each time you put the key in the ignition, it checks that the code emitted by your key is in fact the one expected by your immobilization box. It is only at this instant, that it will let you start. It is thanks to RFID technology (chip in the key) that this unit will work.
The different solutions to bypass the immobiliser on your Audi Sq7
Enter the code to turn off the immobiliser
First technique, your key no longer permits your Audi Sq7 to start, you want to disable the immobiliser of your Audi Sq7, but first of all you should try this technique to start it and take it to a garage verify that you can not accomplish a less significant operation to restore the normal start of your vehicle. Indeed, with your vehicle you should have a spare key (which you should try and which should start your Audi Sq7), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your vehicle by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to confirm the digit and resume, duplicate the operation until you have entered the whole code. This should let you start your Audi Sq7 without having to remove the immobiliser.
Repair your key at a key specialist or your car dealer
If despite a battery change, several tries to enter the immobiliser code on your Audi Sq7 still doesn’t want to start, it’s likely your key that’s at issue. We can understand that you still want to bypass the immobiliser system from your Audi Sq7. Indeed, your transponder must have been damaged or must have fallen off your key. To correct this trouble, only option, go to a key specialist (also available on the internet) or, at your car dealer who can restore your Audi Sq7 key. Depending on who you go to the repair should cost you about 100 euros if you still have a duplicate or your “code card” and about 350 euros at your car dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Audi Sq7.
Manually remove your immobilizer
Although you may be tempted to bypass the immobilizer from your Audi Sq7, this is not recommended at all for some reasons. First your Audi Sq7 would be much more vulnerable to theft attempts. Indeed, without an immobiliser box, simply doing “the wires” may be enough to start it. Moreover to that, your insurance, in case of theft most likely won’t refund you if it acknowledges that the immobiliser on your Audi Sq7 has been removed, bypassed or deactivated. This if you still want to do it, some websites online still give the technique, we have made the choice not to disclose it, because it could help people with bad intentions.
To get more tips on the Audi Sq7, take a look at the Audi Sq7 category.
