You’ve probably already heard about the popular EGR valve, the anti-pollution valve. It is not always appreciated by motorists because it has a tendency to develop more trouble than anything else… Actually, determined by the use you are going to make of your car, it can become blocked and trigger you a lot of complications. If this is the case, you are probably wanting to know how to clean the EGR valve of your Ford Mustang ? Don’t stress, we’ve well prepared this article content to help you with this task. To do this, we will first look at the goal of the EGR valve, then what are the failures that the EGR valve of your Ford Mustang can provoke and at last the part that will probably appeal you the most, how to clean the EGR valve Ford Mustang?
How to Clean your Ford Mustang EGR Valve: Role and Operation
Role of the EGR valve
The EGR valve of your car has been integrated to diesel engines principally to lower pollution emitted by automobiles and to fulfill EURO specifications on Ford Mustang . It will therefore control the quality of exhaust gas output and get rid of toxic particles, mainly Nitrogen Oxide.
Operation of the EGR valve
Before we discover how to clean the EGR valve on your Ford Mustang , we will take a look at how it works. As seen just before, its mission is to clean the exhaust fumes, so it will be located at the engine outlet, thanks to a valve, it will be able to return the unburned exhaust gases to the engine for a second burn which will get rid of all unburned toxic particles. It will run mostly at low speed because at high speed the combustion is sufficient to burn all these gases.
How to clean your Ford Mustang EGR valve: Identifying faults
The EGR valve, even though very important to limit the pollution emissions of your Ford Mustang , will regrettably tend to clog up because of soot/gas deposits that will build up in its system, which will finally risk obstructing the operation of the valve, until completely blocking the engine motor, here are the signs of illness that a faulty EGR valve on your Ford Mustang can bring about:
- Motor light on
- Performance loss
- Technical assesment rejected
- Black fumes
- Car that grazes at low speed
- Low RPM settings
How to clean your Ford Mustang EGR valve: In practice
And now we’ll start the part you are most curious about, how to clean the EGR valve of your car. Here are the two techniques that you can use.
Do it on your own
How to clean your Ford Mustang EGR valve system: Without taking it apart
Although this approach is less efficient, it is however possible to consider a “rough” cleaning of your EGR valve, actually, you will only need to use fuel additives, equivalent to the products used to clean the injection. These specific products must be injected into the running engine, at the right operating temperature, diluted in about 20 litres of fuel and run the engine for 3 or 4 minutes in high rev to clean the EGR valve of your Ford Mustang.
How to clean your car EGR valve: With disassembly
Here is the most efficient approach, which will require sufficient access to the EGR valve to do the process on your own. If so, the process is fairly simple. You will need to disconnect the electromagnet from the EGR valve, remove the few screws that hold it in place, and remove it. Once these steps are carried out, now comes the time for cleaning. To make this happen, you will need to use a product such as solvent, petrol, oven cleaning product, which you will leave to act for ten minutes, then scrape off the rest using a scraper, finish cleaning with wire brush. If you want to go further, you can even clean the two canal on which it is connected which may be scorched, for this, use a scraper and a vacuum cleaner to avoid dropping deposits in the conduits. You will only have to reassemble it and you will have finished cleaning the EGR valve of your Ford Mustang.
Have it done by a professional
If, your EGR valve is not accessible because of the series or the engine of your car and if removing it would cause too many problems (removing too many parts that hinder access for example), how to clean the EGR valve of your Ford Mustang? In cases like this, it would be better rather than launching yourself into an overly complex task, you turn to an auto mechanic. He will be able to carry out the job more cleanly and will be able, if necessary, to change the valve if it is dead. The cost of cleaning determined by the difficulty of access is between 70 and 300 €.
Remove the EGR valve of your Ford Mustang
At last, some people make a more radical decision to limit the risk of a failed valve. Rather than cleaning the EGR valve of their Ford Mustang, they just choose to block it in the closed position. This treatment will have the effect of greatly increasing the pollution emitted by the car, of no longer complying with pollution requirements, of having an engine warning light all day on and eventually risk fouling the engine. We strongly suggest against making this choice. If you have other questions or want to learn more about your car, don’t think twice to check out our dedicated page.
In the event that you have any further questions about the Ford Mustang, do not hesitate to consult our Ford Mustang category.
