You’ve probably already read about the renowned EGR valve, the anti-pollution valve. It is not generally appreciated by drivers because it has a tendency to create more problems than anything else… In actual fact, based on the use you are going to make of your car, it can become congested and trigger you a lot of problems. If this is the case, you are probably concerned about how to clean the EGR valve of your Buick Encore ? Don’t get worried, we’ve prepared this content to help you with this procedure. To accomplish this, we will first look at the intent of the EGR valve, then what are the failures that the EGR valve of your Buick Encore can cause and finally the part that will probably concern you the most, how to clean the EGR valve Buick Encore?
How to Clean your Buick Encore EGR Valve: Role and Operation
Purpose of the EGR valve
The EGR valve of your car has been added to diesel engines principally to lower pollution emitted by vehicles and to fulfill EURO standards on Buick Encore . It will consequently control the quality of exhaust gas output and eradicate toxic particles, mainly Nitrogen Oxide.
Operation of the EGR valve
Before we learn how to clean the EGR valve on your Buick Encore , we will check out how it operates. As seen just before, its goal is to clean the exhaust fumes, so it will be installed at the engine outlet, thanks to a valve, it will be able to return the unburned exhaust gases to the engine for a second burn which will eradicate all unburned toxic particles. It will run principally at low speed because at high speed the combustion is sufficient to burn all these gases.
How to clean your Buick Encore EGR valve: Identifying faults
The EGR valve, despite the fact very important to limit the pollution emissions of your Buick Encore , will unfortunately tend to clog up because of soot/gas deposits that will build up in its system, which will eventually risk blocking the functions of the valve, until entirely blocking the engine unit, here are the symptoms that a faulty EGR valve on your Buick Encore can cause:
- Motor light on
- Power loss
- Technical inspection rejected
- Black fumes
- Automobile that grazes at low speed
- Low RPM settings
How to clean your Buick Encore EGR valve: In practice
And now we’ll start the part you are most interested in, how to clean the EGR valve of your car. Here are the two solutions that you can use.
Do it yourself
How to clean your Buick Encore EGR valve system: Without dismantle
Despite the fact this procedure is less efficient, it is however possible to consider a “rough” cleaning of your EGR valve, the reality is, you will only need to use fuel additives, equivalent to the products used to clean the injection. These particular products must be injected into the running engine, at the right operating temperature, diluted in about 20 litres of fuel and run the engine for 3 or 4 minutes in high rev to clean the EGR valve of your Buick Encore.
How to clean your car EGR valve: With disassembly
Here is the most effective procedure, which will require sufficient access to the EGR valve to perform the process without help. If so, the operation is fairly easy. You will need to disconnect the electromagnet from the EGR valve, remove the few screws that hold it in place, and remove it. Once these guidelines are finished, now comes the time for cleaning. To get this done, you will need to use a product such as solvent, petrol, oven cleaning product, which you will leave to act for ten minutes, then scrape off the rest using a scraper, finish cleaning with wire brush. If you want to go further, you can even clean the two conduits on which it is connected which may be scorched, for this, use a scraper and a vacuum cleaner to avoid dropping deposits in the conduits. You will only have to reassemble it and you will have finished cleaning the EGR valve of your Buick Encore.
Have it done by a professional
If, your EGR valve is not accessible because of the series or the engine of your car and if removing it would cause too many complications (removing too many elements that hinder access for example), how to clean the EGR valve of your Buick Encore? In this case, it would be better rather than launching yourself into an overly complex procedure, you turn to an auto mechanic. He will be able to do the job more cleanly and will be able, if required, to change the valve if it is dead. The cost of cleaning based on the difficulty of access is between 70 and 300 €.
Remove the EGR valve of your Buick Encore
At last, some people make a more radical decision to limit the risk of a failed valve. Instead of cleaning the EGR valve of their Buick Encore, they just prefer to block it in the closed position. This treatment will have the consequence of greatly increasing the pollution emitted by the car, of no longer complying with pollution standards, of having an engine warning light all day on and in the end risk fouling the engine. We strongly suggest against making this choice. If you have other questions or want to learn more about your car, don’t hesitate to take a look at our dedicated page.
To discover more tips on the Buick Encore, take a look at the Buick Encore category.
